|
|
|
Welcome to Outdoor Life
Subscribe to Outdoor Life
and enter to win $5000
Browse ByTop UsersTOP USERS |
Q:
I'm currently shooting a compound bow with a 70-pound draw weight that the IBO rates at shooting 290 feet per second. I normally shoot a 28-inch arrow with a 125-grain broadhead. What should be the minimum overall weight of an arrow for an Alaskan moose? --D.W., Fairbury, IL
from on 01.02.09 Answer Question |
ADVERTISEMENT |
OutdoorLife.com is part of the Bonnier Outdoor Group Network
Copyright © 2009 Bonnier Corp. All Rights Reserved. Reproduction in whole or in part without permission is prohibited.
Print
Email
Share
Answers (1)
You should try for a minimum arrow weight of roughly seven grains per pound of maximum draw weight for moose. That would put you at about 500 grains or more with your 70-pound draw weight bow. If you want to shoot aluminum I'd recommend 2315s, and if you want to shoot carbon go with either Easton's Kinetic II or Beman's Carbonmetal Matrix shafts in their stiffest sizes. (If you shoot with your fingers you won't be able to use the stiffest size because it won't tune properly. The stiff size should be fine if you use a release aid.) Good luck. Sounds like a fun trip. --Bill Winke, Bowhunting Expert
Post an Answer (200 characters or less)
You should try for a minimum arrow weight of roughly seven grains per pound of maximum draw weight for moose. That would put you at about 500 grains or more with your 70-pound draw weight bow. If you want to shoot aluminum I'd recommend 2315s, and if you want to shoot carbon go with either Easton's Kinetic II or Beman's Carbonmetal Matrix shafts in their stiffest sizes. (If you shoot with your fingers you won't be able to use the stiffest size because it won't tune properly. The stiff size should be fine if you use a release aid.) Good luck. Sounds like a fun trip. --Bill Winke, Bowhunting Expert
Post an Answer (200 characters or less)