Reader Project submitted by Chris Holdbrooks from Guntersville, AL
Photo courtesy of Chris Holdbrooks
“The width of the carrier is the same as the factory rack on my ATV [40 inches]. The basket is 12 inches off the ground, allowing plenty of clearance for steep approach angles, and the 22-inch-deep basket accommodates two climbing stands.
“The trusses [horizontal members] that run from front to back have a 3/16-inch plate welded to them for bolting to the factory rack. Two horizontal members extending from the front of the basket insert into 1 ¼-inch square tube receivers welded to the ATV’s frame and support the majority of the weight of the carrier and cargo. [ Read Full Post ]