We may earn revenue from the products available on this page and participate in affiliate programs. Learn More ›
Calling a shot simply means the marksman can tell where his bullet hit. This can be done by observing the bullet’s flight and impact or by knowing where the sights were the instant the firearm was triggered. There are two separate, but complementary, ways to call a shot.
When shooting from non-prone positions, witnessing the impact of the bullet is difficult. The trick is to focus intently on the position of the sights and take a mental snapshot of where they were in relation to the target when the bullet was fired.
The best way to develop this skill is through dry-fire practice, coupled with live-fire practice shots at the range. When dry-firing, use a small target that is a challenge to keep the crosshairs on. Don’t fight the wobble of the sight, just smoothly break the shot as it covers the target. Remember where the crosshairs were when the trigger clicked. At the range, do this with every shot.
To actually see your bullet’s impact, you must pair this level of focus with excellent form. If you are square behind the rifle and not putting any pressure on the stock that will cause it to jump to the side under recoil, you’ll be able to watch the bullet and see where it hits.
More from Extreme Accuracy:
Perfect Your Trigger Press
How to Master Practical Positional Shooting
Pick a Riflescope
How To Call Your Shots
Calculate Your Shots: Ballistics Software
How To Make Hits At 1,000 Yards
Top Rounds Used in Sniper Matches
Replace a Stock Trigger